Close
Developed in collaboration with pro riders, it has several new features: 100% Cr Mo frame, U-brakes, composite pedals, pivotal saddle and seatpost, compressionless housing, 700mm handlebars
DurabilityMassive use of Cr Mo 4130/ high-tech machined parts/ double-walled rims.
EfficiencyGeometry approved by pro riders. Kevlar housing replaces the rotor.
VersatilityThis BMX can be used in towns, dirt parks etc.
Low weight / lightweightWeighs only 11.7 kg (excl. front brakes) due to 4130 CrMo & machined aluminium.
Use restriction :Composite pegs cannot be used to carry friends.
Warranty :5 years on frame, 2 years on parts (excluding wear parts such as freewheels, pegs..).
- Size and Colors
SizeOne size.
Weight12.2kg excl. front brake.
ColourSatiny black/ azure blue.
- More infos
Approval byArthur Dietrich and the ABBEVILLE skatepark.
MaintenanceRegularly grease your chain (do not wait until it makes a noise => this means this it is dry, and susceptible to rust). Regularly check the tyre pressure (checking every ride is recommended) and check the condition of your housings once a year + the tightness of all nuts and screws.
Storage intructionsAvoid prolonged exposure to salty air (balconies).
- Technical details
Brakes : Compressionless kevlar housing, 2-finger aluminium levers, tektro aluminium U-brake calipers for precision and power. The rotor, which requires maintenance, has been replaced by new, revolutionary technology used by the world’s best riders. Compressionless housing! Owing to the combination of kevlar and stainles steel, this housing allows for 2 ½ turns of the handlebars without putting them back in position. Removable front brake pivots for skatepark pros.
Accessories : Comes with 2 composite pegs only intended for use in the skatepark...
Frame/fork : 100 Cr Mp 4130 tubes, top tube 90 inches and base 13.35 inches. Integrated steering and MID box, 100% Cr Mo 4130 fork with removable brake pivots. Developed with pro riders, this geometry is one of the best (jumps, figures, manual...). Jumping balance is exemplary, and facilitates control of the bike in the air. The use of Cr Mo 4130 tubes ensures light weight and strength. All parts subject to heavy stress are oversized.
Handlebars/stem/grips : Cr Mo 4130 7.5” 700mm handlebars (back 10°, up 3). Geometry facilitates stunts. The combination of Cr Mo 4130 steel ensures great strength. The ultra-light yet solid stem is a technical treasure, owing to machining of a block of 6061 aluminium. We have added textured grips to ensure comfort and impact resistance, owing to their end caps.
Wheels/tyres : ”10-tooth driver” , 48-spoke back wheel with a 14mm axle, double-walled rims and ring bearings. Front wheel has 36 spokes and a 10mm axis. Kenda 20 x 2.1 front tyre and K-1040 20 x 2.1 back tyre. The best weight/strength ratio is obtained at the back with a 48-spoke aluminum double-walled rim together with a 14mm axle. For enhanced versatility on all terrain types, we have used a gravel front tyre and an all-round back tyre.
Drivetrain/pedals : 3-part 4130 chromoly steel chainset. 175mm sealed bearings. KMC 710 ultra-reinforced silver and black chain, machined anodised aluminium 28-tooth ring, 10-tooth micro-drive rear hub with bearings. We have chosen a 28x10 micro drive drivetrain because of its excellent impact resistance. Gearing is the same as a 44x16. The non-slip black plastic pedals are approved for use in all skateparks and facilitate grind pedals.
Saddle/seatpost : We have chosen to make a bike with the best components on the market so that this bike is as light as possible. The best example is the combination of the pivotal composite saddle and the pivotal aluminium seatpost ensuring the best possible combination of lightness, strength and ergonomics.
change country